Left Control Panel View - Dell EMC PowerEdge R940 Installation And Service Manual

Left control panel view

Figure 3. Left control panel view
Table 3. Left control panel features
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
3 iDRAC Quick Sync 2
wireless indicator
(optional)
Status LED indicators
NOTE: The status LED indicators are always off and only turns on to a solid amber if any error
occurs.
Table 4. Status LED indicators and descriptions
Icon Description
Drive indicator
10 PowerEdge R940 overview
Icon
N/A
Condition
The indicator turns solid amber if
there is a drive error.
Description
Indicate the status of the system. For more information, see the
Status LED indicators section.
Indicates the system health. For more information, see the System
health and system ID indicator codes section.
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/idracmanuals.
Corrective action
• Check the System Event Log to determine if the drive
has an error.