Right Control Panel - Dell EMC PowerEdge R940 Installation And Service Manual

Right control panel

Figure 6. Right control panel
Table 7. Right control panel
Item Button or port
1 Power button
2 iDRAC Direct port
3 USB ports
4 VGA port
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Icon Description
Indicates if the system is turned on or off. Press the power button to
manually turn on or off the system.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
The iDRAC Direct port is micro USB 2.0-compliant. This port enables
you to access the iDRAC Direct features. For more information, see
the iDRAC User's Guide at Dell.com/idracmanuals.
The USB 3.0 ports are 9-pin, USB 3.0-compliant. These ports enable
you to connect USB devices to the system.
Enables you to connect a display device to the system. For more
information, see the Technical specifications section.
PowerEdge R940 overview 13