Table of Contents
Advertisement
Chapter 3 Appendix
(2)
Error messages on the virtual LCD
You can check error messages on the virtual LCD displayed in the Web browser of EXPRESSSCOPE engine 3. See
"EXPRESSSCOPE Engine 3 User's guide" for the virtual LCD.
The table below shows error messages, meaning and actions.
BIOS message displayed
on the top of LCD
XX POST Started
XX BIOS Rev YYYY
POST Completed
Successfully
POST ERROR XXXX
No Available Memory in
System
Error Pause in POST
Entering BIOS SETUP
MENU
120
Cause
Displayed during POST
"XX" indicates the POST code in
execution.
Displayed during POST"XX" indicates the
POST code in execution. "YYYY"
indicates the version of the system
BIOS.
POST is successfully completed.
Error XXXX was detected during POST.
No available memory is implemented.
An error was detected during POST.
POST paused.
Starting BIOS SETUP MENU
Scalable Modular Server DX2000 Maintenance Guide
BIOS message displayed on
the top of LCD
Action
Not an error
Check the error message displayed on LCD
and take an action.
Check if memory is correctly implemented.
Check the error message displayed on the
screen and take an action.
This is not an error. This message
disappears when the SETUP operation
finishes.
1. POST Error Message
(1/2)
Advertisement
Table of Contents
