Parallel Port (Lpt1); Pci Clock Selection (Jpciclk1) - Advantech ASMB-785 User Manual

Table 2.6: Advantech LPC Module List
PCA-COM485-00A1E
2.20

Parallel Port (LPT1)

LPT1
The parallel port is normally used to connect the motherboard to a printer. The
ASMB-785 includes an onboard parallel port, accessed through a 25-pin flat-cable
connector, LPT1.
2.21

PCI Clock Selection (JPCICLK1)

JPCICLK1
JPCICLK1 is a jumper to select a PCI slot clock speed between 66 or 33 MHz, the
default setting is 33 MHz (2-3 closed).
ASMB-785 User Manual
4 ports RS-485 module connect to LPC connector
34