MAINTENANCE
Removing and Installing the Keypad
Recommended tools: no tool is required.
To remove the Keypad
1. Remove the Internal Assembly. Refer to "Removing and Installing the Internal
2. Remove the keypad board from the unit.
To install the Keypad
1. Install the keypad. Verify that all the keys are properly inserted into their
2. Install the Internal Assembly. Refer to "Removing and Installing the Internal
MTP850 TETRA Handportable Terminal / Basic Service Manual
Assembly" on page 6-15.
dedicated holes.
Assembly" on page 6-15.
Figure 19 Keypad Removal and Installation
6 - 23