MAINTENANCE
Removing and Installing the Sim Card Door
Recommended tools: T-6 Torx bit, Torx driver.
To remove the Sim Card Door from the unit
1. Remove the battery.
2. Using the Torx driver with the T-6 Torx bit, unscrew the two screws fastening
3. Remove the latch from the back housing.
4. Remove the Sim card Door.
To install the Sim Card Door onto the unit
1. Place the Sim card Door into position on the back housing.
2. Place the latch onto the back housing, including two flathead screws.
3. Using the Torx driver with the T-6 Torx bit, screw the two screws fastening the
4. Install the battery.
MTP850 TETRA Handportable Terminal / Basic Service Manual
the latch to the back housing.
latch to the back housing.
Figure 9 SIM Card Door Removal and Installation
6 - 13