Charger Recognition Test - Motorola MTP850 S Service Manual

5.2 - 14 MTP850 TETRA Handportable Terminal / Basic Service Manual
42. Press
43. After pressing all keys, the display is clear.
44. Press any key to continue. The display shows "Rotary test". Turn the rotary
45. Press any key to continue. The display shows "To next test Press any key".
46. Press any key to continue. The display shows "To begin the photo sensor test
47. Press any key again. The display shows "Place the photo sensor in the
48. Press any key again. The display shows "Cover the photo sensor and press
49. Press any key again. The display shows "PHOTO SENSOR TEST PASSED",
50. Press any key again. The display shows "The test is completed", "Press any
51. This completes the test. Press any key to turn the radio OFF.

Charger Recognition Test

• Turn the radio ON.
• Connect the Rapid Travel Charger accessory connector to the handset. Check
• Connect the Vehicle Power Adapter (VPA) Charger accessory connector to the
• Connect the handset to the Desktop Charger. Check whether the LCD display
• Verify that the battery charger is in progress (the process advance is indicated
• Press the "ON/OFF" key. The radio should turn OFF.
Key. The display shows:
*
*
*
*
<<<< >>>>
*
*
*
*
Every time you press causes the respective display to disappear.
switch clockwise, each click causes the respective clockwise arrow sign to
disappear.
Then, a set of counter clockwise arrows appear, turn the rotary switch counter
clockwise, each click causes the respective counter clockwise arrow sign to
disappear. The display shows "Press the rotary".
press any key".
lighted place and press any key". Expose the photo sensor (located between
the key of 8 and #) to a lighted place.
any key". Do as told and observe the keypad backlight.
"press any key to continue to next test".
key to turn the radio OFF".
whether the LCD display shows "charger connected" and that the keypad
backlight is turned ON.
handset. Check whether the LCD display shows "charger connected" and that
the keypad backlight is turned ON.
shows "charger connected" and that the keypad backlight is turned ON.
on the Battery Strength icon).
TEST SETUP & TESTING 806-870MHz