How To Configure The Ifr 2968 Setup - Motorola MTP850 S Service Manual

TEST SETUP & TESTING 380–430MHz

How to Configure the IFR 2968 Setup

Perform the following steps to configure the IFR 2968 with the radio set:
1. Turn ON the IFR.
2. Press "Systems" Mode Key (wait until the digital system is initialized).
3. Press "Tetra Mobile" soft key.
4. Press "Setup" soft key and enter the System Parameters Screen.
5. Press "Channel Plan" soft key.
6. Press "Tetra 380+0MS" soft key. The "Control Channel" automatically
7. Press twice the "Traffic Channel" soft key and check that the marker goes to
8. Press "Country Code" soft key. Enter "234" and press again "Country Code"
9. Press "Network Code" soft key. Thereafter, enter "2392" and press "Network
10. Press "Base Color" soft key. Thereafter, enter "1" and press "Base Color" soft
11. Press "More" soft key.
12. Press "Location Area" soft key. Thereafter, enter "22" and press "Location
13. Press "More" soft key.
14. Press "Min Rx Level" soft key. Thereafter, enter "-110dBm" and press "Min Rx
15. Press "Max Tx Level" soft key. Thereafter, enter "30dBm" (for 1W radios) or
16. Press "Access Parameter" soft key. Thereafter, enter "-53dBm" and press
17. Press "Base Service" soft key.
Note: You are entering base services setup.
MTP850 TETRA Handportable Terminal / Basic Service Manual
changes to "3600"; and "Traffic Channel" automatically changes to 3700.
Timeslot. Press Data key "3" followed by the "Traffic Channel" soft key, to
change to Timeslot "3".
soft key.
Code" soft key.
key.
Area" soft key.
Level" soft key.
"32.5dBm" (for 1.8W radios). Press "Max Tx Level" soft key.
"Access Parameter" soft key.
5.1 - 5