Vega VEGAPULS 62 Operating Instructions Manual page 65

Process conditions
Process temperature (measured on the process fitting), depending on seal and antenna
system
- FKM (Viton)
- FKM (Viton) with impedance
cone PP
- FKM (Viton) with temperature
adapter
- Kalrez 2035, 6230 (FDA)
- Kalrez 2035, 6230 (FDA) with
temperature adapter
- Kalrez 6375
- Kalrez 6375 with impedance
cone PP
- Kalrez 6375 with temperature
adapter
For the vessel pressure, you also have to note the specifications on the type label.
Always the lowest value is applicable.
Vessel pressure - horn antenna
Vessel pressure - parabolic an-
tenna
Vessel pressure relating to the
flange nominal stage
Vibration resistance
Data on rinsing air connection
Pressure
Air quantity see diagram
VEGAPULS 62 • 4 ... 20 mA/HART
-40 ... +130 °C (-40 ... +266 °F)
-40 ... +80 °C (-40 ... +176 °F)
-40 ... +200 °C (-40 ... +392 °F)
-15 ... +130 °C (+5 ... +266 °F)
-15 ... +200 °C (+5 ... +392 °F)
-20 ... +130 °C (-4 ... +266 °F)
-15 ... +80 °C (5 ... +176 °F)
-20 ... +200 °C (-4 ... +392 °F)
-1 ... 40 bar/-100 ... 4000 kPa
(-14.5 ... 580 psi)
-1 ... 6 bar/-100 ... 6000 kPa (-14.5 ... 870 psi)
see supplementary instructions manual
"Flanges according to DIN-EN-ASME-JIS"
mechanical vibrations with 4 g and
5 ... 100 Hz
max. 6 bar (87.02 psi)
Tested according to the regulations of German Lloyd, GL directive 2.
7)
7)
Supplement
65