Squelch Level - Icom IC-M802 Instruction Manual

6
SET MODE
D D General set mode items (continued)

Squelch level

This item adjusts the squelch threshold level from 1
to 100.
(default: 50)
When the squelch is activated, signals stronger than
the this set level only are received.
I Set mode A
D D Entering set mode
q Push [POWER] for 1 sec. to turn the power OFF, if
necessary.
w While pushing [MODE
the power ON and enter set mode.
e Rotate [GRP] to select the desired item.
e Rotate [CH] to set the values or conditions for the
selected item.
r Turn the power OFF and ON again to exit set mode.
D D Set mode A items
Transmit meter
This item selects the transmit meter type from an-
tenna current and RF power.
• ANTENNA-CURRENT
• RF-POWER : Shows relative output power.
Number of user channels
This item sets the number of user channels. Up to
160 channels can be set.
16
], push [POWER] to turn
DIM
: Shows driving current of the an-
tenna. (Can be selected when
an external antenna tuner is con-
nected.)
(default)
G R P I T E M C H S E L
[MODE
[POWER]
* * * S E T M O D E A * * *
A N T E N N A - C U R R E N T
ÇÇ
R F - P O W E R
G R P I T E M C H S E L
* * * S E T M O D E A * * *
G R P I T E M C H S E L
]
DIM