External Antenna Tuner Type; Automatic Tune - Icom IC-M802 Instruction Manual

D D Set mode A items (continued)
FSK ITU channel selection
This item sets the capability of the ITU channels for
FSK from ON and OFF.
This item will not appear when ITU channels are in-
hibited.

External antenna tuner type

This item selects the connected Icom antenna tuner
type from AT-140, AT-130/E, AT-120/E and AH-3
• AT-140 : AT-140 is connected. (default)
• AT-130/E : AT-130/E is connected.
• AT-120/E : AT-120/E is connected.
• AH-3 : AH-3 is connected.
External antenna tuner type
This item selects the external antenna tuner control
signals (Start and Key) conditions for operation with
a non-Icom antenna tuner.
• START&KEY : Reverse both start and key sig-
nals.
• KEY : Reverse the KEY signal.
• START : Reverse the START signal.
• ICOM : Use Icom's standard conditions
(default)

Automatic tune

When an optional AT-130A, AT-130 or AT-130E auto-
matic antenna tuner is connected, tuning can be
started automatically without pushing [TUNE
for instant operation.
If manual tuning is required, this automatic operation
can be deactivated.
* * * S E T M O D E A * * *
ÇÇ
G R P
* * * S E T M O D E A * * *
ÇÇ
G R P
* * * S E T M O D E A * * *
ÇÇ
G R P
* * * S E T M O D E A * * *
],
THRU
ÇÇ
G R P
SET MODE
O N
O F F
I T E M C H S E L
A T - 1 4 0
A T - 1 3 0 / E
A T - 1 2 0 / E
A H - 3
I T E M C H S E L
S T A R T & K E Y
S T A R T
K E Y
I C O M
I T E M C H S E L
O N
O F F
I T E M C H S E L
6
17