Setting The Time & Day; Running Your Programme - Danfoss WP75- RF Installation & User's Instructions

Setting the Time & Day
Press PROG until the time and day number
begin to blink in the display.
DAY - Press DAY until correct day is shown
(1=Monday, 2=Tuesday etc).
TIME - Press + and - to change time (press
and hold to change in 10 min increments).
Press PROG again to accept the settings.

Running your programme

If you are happy to use the preset
programmes on page 11, you don't need to
do anything else.
Press PROG until colon fl ashes in display.
Your unit is in RUN mode and your hot
water will be heated according to the preset
programmes.
12
To change TIME
To
change
DAY