Other Features Of The Remote Controllers - Takagi 110 Outdoor Installation Manual And Owner's Manual

How to change to the High temperature mode
1. Turn off power to the remote controller by pressing the "ON/OFF" button. (Lamp is OFF to indicate
that power is off.)
2. Press and hold both the "HOT" and "COLD" buttons simultaneously for at least 5 seconds, then
make sure that "1" (or "0") is displayed on the remote controller.
"1" is displayed for single unit.
3. Press the "TIME" button. Make sure that "OFF" and "F1" are displayed on remote controller.
4. Press the "INFO" button. Afterward, make sure that "OFF" blinks.
5. Press the "HOT" button or "COLD" button to set display to "on". Make sure that "on" is blinking.
6. Press both the "BUZZER" button and "INFO" button simultaneously to save the setting. Make sure that
the display is no longer blinking.
7. Press the "ON/OFF" button to exit the edit mode.
8. Turn on power to the remote controller by pressing the "ON/OFF" button again. (Lamp is ON to indicate
that power is on.)

OTHER FEATURES OF THE REMOTE CONTROLLERS

-Features available on 100112183 (TK-RE02) and 100112155 (TM-RE30)-
<Buzzer operation>
If there is a problem with the water heater, the remote controller will sound a buzzer and display the error
code to inform you of the source of the problem.
You can stop the buzzer by pressing : "any button" for 100112183 (TK-RE02)
For details on the error code, refer to p. 43.
NOTE: If you want to disable the buzzer operation, press and hold the "BUZZER" button for 3 seconds or
longer. (100112155 (TM-RE30) only.)
Information mode>
You can get some information about the water heater condition by pressing :
During the information mode, the information will be rotated by pressing the "INFORMATION" or "INFO"
button as follows:
Inlet
water temperature
I N L /M G /M
O UT
FLOW
"0" is displayed for Easy-Link System.
I N L/ M G/ M
O U T
FLOW
I N L/ M G/ M
O U T
FLOW
L/ M G/ M
I N
O U T
FLOW
I N L/ M G/ M
O U T
FLOW
"Buzzer button" for 100112155 (TM-RE30).
"INFORMATION" button for 100112183 (TK-RE02)
"INFO" button for 100112155 (TM-RE30)
Outlet
water temperature
39
L / M G / M
I N
O U T
FLOW
Water
flow
Page
Owner's Guide
Normal Operation
Finish
information mode