Cooling System Specifications - Polaris A09BG50AA User Manual

RADIATOR CAP / SYSTEM
PRESSURE TEST
1. Remove radiator cap and test using a cap tester
(commercially available).
2. The radiator cap relief pressure is 13 lbs. for all
models.
COOLING SYSTEM
Radiator
Front
View
Pressure test
here with cap
in place
Vent hole inside cap
liner must be clear.
COOLING SYSTEM
SPECIFICATIONS
THERMISTOR READING DURING OPERATION
Condition Approx. Reading
(Min- -Max)
Hot Light 178Ω -- 190Ω
On
Fan Off 296Ω -- 316Ω
Fan On 236Ω -- 251Ω
System
Capacity
Radiator
Cap Relief
Pressure
RECOMMENDED COOLANT
Use only high quality antifreeze/coolant mixed with
distilled water in a 50/50 or 60/40 ratio, depending on
freeze protection required in your area. CAUTION:
Using tap water in the cooling system will lead to a
buildup of deposits which may restrict coolant flow and
reduce heat dissipation, resulting in possible engine
damage. Polaris Premium 60/40 Antifreeze/Coolant is
recommended for use in all cooling systems, and comes
pre-mixed and ready to use.
ENGINE
Thermistor
26 ± 2.1 ft.lbs.
(35 ± 3 Nm)
Temperature
215° F
(102° C)
180° F (82° C)
195° F (91° C)
2.25 Quarts
(2.13L)
13 PSI
3.7