Polaris A09BG50AA User Manual page 222

ELECTRICAL
Connector 1 Signal Name
Pin #
J1--A STARTER
J1--B BRAKE
J1--C RUN
J1--D HOT_INDICATOR
J1--E THERM_RTN
J1--F THERM
J1--G TRANS
J1--H LIGHTS
J1--J COIL 3
J1--K COIL 2
J1--L COIL 1
J1--M BAT+
J1--N ACC_PWR
J1--P GND
J1--R BAT_PROT
J1--S
10.6
Starter output provides ground path when active.
Brake input for starter lockout. Active high.
PDM enable input. Connected to BAT_PROT via ignition and run
switches.
Engine hot signal. Provides a ground path for the hot indicator lamp
Thermistor ground
Thermistor input
Transmission signal voltage input for starter lockout
Powers vehicle lighting
Alternator coil input
Alternator coil input
Alternator coil input w/resistance to ground
Battery Positive
IPS that provides power to the accessories
Battery Ground
SSCB output provides battery power to loads. Also provides constant
power for real time clock.
FAN Relay control input to enable operation of the fan
Description
IPS = Intelligent Power Switch