Configuring Eco-Settings; Managing Contacts; Adding Contacts; Adding Groups - Lexmark XC9225 User Manual

Setting up and using the home screen applications
3
Apply the changes.
Creating a slide show
Before you begin, make sure to configure the slide show settings. For more information, see the documentation
that came with the solution.
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow.
Note: Images appear in alphabetical order.
Configuring Eco‑Settings
1
From the home screen, touch Eco‑Settings.
2
Configure the Eco‑Mode settings or schedule a power-saving mode.
3
Apply the changes.

Managing contacts

Adding contacts

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book.
3
From the Contacts section, add a contact.
Note: You can assign the contact to one or more groups.
4
If necessary, specify a login method to allow application access.
5
Apply the changes.

Adding groups

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book.
26