Cortex LP-1 Owner's Manual page 8

STEP 4
1. Attach slide tube (08) to main upright frame (01) using hex bolt M10*25mm (18) and pin (16).
2. Attach top connect tube (07) to slide tube (08) using washer φ10 (22) and nylon lock nut M10mm
(24).
3. Attach foot plate (09) to top connect tube (07) using washer φ10 (22) and nylon lock nut M10mm
(24).
4. Attach small buffer (14) to top connect tube (07).
5. Attach OP tube (10) to top connect tube (07) using bolt M8*10mm (21).
6. Attach big buffer (15) to OP tube (10).
8
LP-1 Leg Press