Endress+Hauser Proline Promass E 200 Operating Instructions Manual page 71

Proline Promass E 200 FOUNDATION Fieldbus
Parameter
Failure mode
Failure frequency
Invert output signal
Endress+Hauser
Description
Define output behavior in alarm condition.
Enter frequency output value in alarm
condition.
Invert the output signal.
Configuring the switch output
Navigation
"Setup" menu → Advanced setup → Pulse/frequency/switch output
Structure of the wizard for the switch output
 20 "Pulse/frequency/switch output" wizard in the "Setup" menu: "Switch" operating mode (Part 1)
Selection / User entry
• Actual value
• Defined value
• 0 Hz
0.0 to 1 250.0 Hz
• No
• Yes
Operating
mode
Switch
Switch
out funct
Off On
behavior
diag. beh
Alarm or
Alarm
Invert outp.sig.
End of wizard
Commissioning
Factory setting
0 Hz
0.0 Hz
No
Diag.
Assign
Warning
warning
A0017439-EN
71