Dell SC8000 Deployment Manual page 48

Chapter 2 Install the Hardware
* These IO cards cannot be ordered for SC8000 controllers. An SC8000 controller can contain these IO cards only if they were
transferred to the SC8000 controller during an upgrade from a CT‐SC030 or CT‐SC040 controller.
See Also
SC8000 Back‐Panel Features and Indicators on page 10
Install Low-Profile IO Cards in Slots 1–3
To install low‐profile IO cards, first remove riser 1.
1 Remove riser 1.
a Hold onto the touch points of the riser.
b Lift the riser from the riser connector on the system board.
Table 1. Removing Riser 1
1 Riser 1 cage
2 Riser 1
3 Riser guide, back (right)
38
2
1
5
6
4 Riser guide, back (left)
5 Riser 1 connector
6 Riser guide, front
Storage Center SC8000 Controller Deployment Guide
3
4