Dell SC8000 Deployment Manual page 169

4 (Optional) Change the preferred physical port for one or more virtual ports.
a Click Edit Virtual Ports. The wizard displays a list of virtual ports.
b For each virtual port that you want to modify, select the preferred physical port In
the Preferred Physical Port.
c When you are finished, click Apply Changes. The iSCSI tab appears.
5 Confirm that unused ports are not configured.
a Set the Purpose field to Unknown.
b Confirm that the Fault Domain field is set to <none>.
c (Optional) Type a descriptive name in the User Alias field.
Configure SAS Ports
Configure the back‐end SAS ports.
1 Click the SAS tab.
2 Configure each back‐end SAS port.
a Set the Purpose field to Back End.
b Confirm that the Fault Domain field is set to <none>.
c (Optional) Type a descriptive name in the User Alias field.
3 Configure each port that is unused or used for IPC between controllers.
a Set the Purpose field to Unknown.
b Confirm that the Fault Domain field is set to <none>.
c (Optional) Type a descriptive name in the User Alias field.
Dell Compellent
Complete the Startup Wizard
159