Dell SC8000 Deployment Manual page 133

2 Label both ends of each Ethernet cable with the appropriate management or iDRAC
label.
a Near the connector, align the label perpendicular to the cable and affix it starting
with the top edge of the label.
Figure 108. Align Cable Label
b Wrap the label around the cable until it fully encircles the cable. The bottom of each
pre‐made label is clear so that it does not obscure the text.
Figure 109. Wrap Cable Label
c Apply a matching label to the other end of the cable.
Dell Compellent
Connect the Ethernet Management and iDRAC Interfaces
123