Advertisement
Important
NP6251
Model
:
Location
: FRONT DECK PAPER STOCK ASSEMBLY
: SAFETY OF FRONT DECK PAPER STOCK ASSEMBLY
Subject
Reason
: Protective tape is to be affixed to the edge of the paper limit plate of the right and left front deck paper
stock assemblies, in order to improve safety.
(Right front deck paper stock only for the NP6045. )
: In order to improve safety when loading paper, protective tape will be affixed to the edge of the paper
Details
limit plate of the right and left front deck paper stock assemblies.
The factory countermeasure will consist of removing burrs from the edges.
: When servicing in the field, lightly feel the edge of the paper limit plate. If there are any sharp burrs,
Servicing
follow the steps below to tape them.
<Procedures>
1) Pull out the right and left front deck paper stock assemblies.
2) Clean the edge of the paper limit plate.
é
Use 5 or 6 sheets of lint free paper folded over twice.
Caution :
When cleaning, take extra care not to injure your hands be rubbing strongly against the edge.
3) Cover the edge of the paper limit plate with the protective tape.
é
Affix the protective tape so as to completely cover the edge.
é
Affix the protective tape by pinching it between the fingers and pressing it into place.
Service Bulletin
Issued by Canon Europa N.V.
COPIER
No.:
6251-024
(FF-T01-H2-000046-01)
14.01.2000
DATE:
-
1 / 2 -
Advertisement
