Advertisement
List of components (upper guide unit)
No.
Description
1
UPPER GUIDE, HOLDING TRAY
2
RETAINER, UPPER GUIDE
3
RETAINER, LOWER, UPPER GUIDE
4
SCREW
Installing the Upper guide Unit
1. Open the front cover, and slide out the holding tray assembly to the front.
2. Insert the holding tray upper guide into the hole of the roller mount found at the center of the inlet
guide assembly.
3. Fit the upper guide retainer to the holding tray upper guide.
4. Fit the upper guide lower retainer to the upper guide from under the holding tray upper guide, and
secure it in place with screws.
The upper guide lower retainer has its own orientation. Be sure to fit it on the upper guide retainer
in advance. It cannot be mounted unless it is oriented correctly.
Roller mount
Upper guide lower retainer
Figure 1 Location of the Holding Tray Upper Guide
Part number
FB2-8522-000
FB2-8523-000
FB2-8524-000
XA9-0628-000
Screw
Upper guide retainer
6251-008 Rev. 2
Q'ty
Remarks
1
1
UPPER GUIDE UNIT
1
FG6-3412
1
Holding tray upper guide
Holding tray assembly
-
2 / 3 -
Advertisement
