Advertisement
< Proceeding with the work >
1) Removing the fixing web
• Refer to the service manual for the
procedure to follow in drawing out
the fixing/feeding unit and removing
the fixing web.
2) Removing the flywheel mount
• Remove the 2 screws [1], and
remove the flywheel mount.
3) Removing the flywheel
• Remove one E ring [2], and
remove the flywheel.
4) Removing the heater support plate and the
heater cord guide
• Remove the 2 screws [3] and remove the
heater support plate and the heater cord
guide.
(front side)
Flywheel mount
[1]
[2]
Flywheel
Heater support
plate
6251-017 Rev. 1
Fixing web
[3]
Heater cord guide
-
2 / 4 -
Advertisement
