Advertisement
NP6251
Model
:
Location
: MACHINE FRONT PLATE
: ATTACHING FRONT DOOR HINGE SHAFT
Subject
: For efficiency in production, the shape of the hinge shaft was changed and this change enables
Reason
attachment of the hinge shaft with one hinge stop plate instead of two.
: A brim was added to the new hinge shaft with the consequence that the bottom hinge stop plate of the
Details
hinge shaft is no longer needed. (See Figure below.)
Hinge stop plate
Stopper here is no
longer needed.
Servicing
: When replacing the hinge shaft with a new one, attach it with the end with the brim at the bottom.
Service Bulletin
Issued by Canon Europa N.V.
Hinge shaft
[Old hinge shaft ]
6251-020 Rev. 1
No.:
(FF-T01-H2-000040-01)
DATE:
10.12.99
Hinge shaft
Brim
[New hinge shaft]
COPIER
-
1 / 2 -
Advertisement
