Advertisement
: When the aforementioned symptom is noted, replace the stirring spring or the hopper assembly to the
Servicing
modified types.
In addition to conforming to this procedure, take precautions to avoid toner spills from the hopper
assembly upon replacing the stirring spring since this spring is used inside the hopper.
Special precautions to take in installing the new parts (see Fig. 2)
1. Insert the protruding point of the stirring spring separator onto the crevice point of the stirring
spring holder.
2. Push the stirring rod into the hole of the shaft until it stops, and fasten with a screw.
Protruding point
Crevice point
Fig. 2 Installing the new parts
Stirring rod
Screw
6251-013 Rev. 1
-
2 / 3 -
Advertisement
