Advertisement
<Procedure for sticking the sheet on the inside of the cassette>
1. Position the front side size plate to the slot marked A (STMT-R) on the paper guide plate of the
cassette.
2. Peel off the paper that will separate from the protective sheet and affix this sheet by using the front
side of the slot marked A as reference and cover the slots marked D, F, H, K, and L, in achieving
the affixing requirements.
Caution:
1. Make sure that the protective sheet is affixed in such a way that it is firmly pressed to the paper
guide plate of the cassette with no bulges.
2. Do not accidentally cover the slot marked A because this slot is to be used for registration of the
paper width standard value.
Front side size plate
Fig. 6 Affixing position for the protective sheet
6251-016 Rev. 1
*Affix the protective sheet by
using the front side of the slot
marked A as a reference.
Protective sheet
Cassette
-
4 / 5 -
Advertisement
