Advertisement
8) Replacing the retaining screw for the bushing plate (the plate that takes the reciprocating
movement) and tightening the nut.
•
Replace the retaining screw for the bushing plate (the plate that takes the reciprocating
movement) with the 8mm screw (XB1-2400-807), and lightly tighten it until there is no
play for the bushing plate.
•
With the screwdriver inserted into the screw, attach the nut (XB7-2100-409) to the screw
and tighten it firmly. While the nut is being tightened, restrain the movement of the screw
with the use of the screwdriver to prevent rotation of the screw.
Nut (XB7-2100-409)
9) Assembly
•
Follow the procedure in reverse for assembly.
Service Parts :
No.
1
Old SCREW, MACHINE M4x6
New SCREW, M4x8
2
Old
New NUT, HEX M4
Affected Machines (LPS version):
CJB 16301 and later
DJB 13016 and later
Bushing plate for taking
the reciprocating movement
Description
Screw (XB1-2400-807)
Part number
Q'ty
XB1-2400-609
1→0
XB1-2400-807
0→1
XB7-2100-409
0→1
6251-017 Rev. 1
Inter-
P.C.
-- -- -- -- -- -- -- --
change-
ability
811- or 810-
No Yes
811- or 810-
← ← ← ←
-
4 / 4 -
Advertisement
