Parameter Adjustment With Ams™ And Pdm; Saving The Parameter Adjustment Data - Vega VEGADIF 65 Operating Instructions Manual

7 Operating with PACTware and other adjustment programs
Note:
Keep in mind that for setup of VEGADIF 65, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also
available on this CD.
In addition, this DTM Collection incl. the basic version of PACTware
can be downloaded free of charge from the Internet. Move via www.
vega.com and "Downloads" to "Software".
7.3 Parameter adjustment with AMS™ and PDM
Also device descriptions will be available for VEGADIF 65 as DD or
EDD for the adjustment programs AMS™ and PDM.
A free-of-charge download is available via Internet. Move via www.
vega.com and "Downloads" to "Software".

7.4 Saving the parameter adjustment data

It is recommended to document or save the parameter adjustment
data. They are hence available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
VEGADIF 65 • 4 ... 20 mA/HART
59