Operation; Packaging, Transport And Storage - Vega VEGADIF 65 Operating Instructions Manual

Packaging
Transport
Transport inspection
Storage
VEGADIF 65 • 4 ... 20 mA/HART
The optional heating requires its own operating voltage. You can find
details in the supplementary instructions manual "Heating for indicat-
ing and adjustment module".
This function is generally not available for approved instruments.

3.3 Operation

VEGADIF 65 can be adjusted with different adjustment media:
with indicating and adjustment module
l
with the suitable VEGA DTM in conjunction with an adjustment
l
software according to the FDT/DTM standard, e.g. PACTware and
PC
with manufacturer-specific adjustment programs AMS™ or PDM
l
With a HART handheld
l

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
Caution:
Instruments for oxygen applications are sealed in PE foil and provided
with a label "Oxygen! Use no Oil". Remove this foil just before
mounting the instrument! See instruction under "Mounting".
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
l
Protected against solar radiation
l
3 Product description
13