Button Functions; Using The Leads - AEMC 6550 Quick Start User Manual

Button Functions

ICON
Enters temperature and humidity information and calculate temperature
TEMP
corrected resistance
Enables/Disables the alarms
ALARM
Displays Help information; Enables/Disables the backlighting of the display
HELP /
MEM
Stores the measurements
Configuration of the measurement parameters
CONFIG
DISPLAY
Switch between screens
FILTER Smoothing of the measurements
GRAPH
Switch graph mode ON/OFF

Using the Leads

Specific leads are supplied with the instrument. To use them, attach either the test probes or alliga-
tor clips (supplied with the instrument).
NOTE: These accessories have hand guards. For safety reasons, the user's hands must
always be behind the hand guard.
Always keep hands behind this protective guard:
• Voltages ≤1000V
• Insulation using a test voltage ≤ 5000V
Measurements of voltages ≥1000V on supply lines should be made using the test probes only,
with the user's hands behind the hand guard on the lead.
WARNING: The leads with large clips (automobile battery charger type) proposed as
accessories should not be used for line voltage measurements because their jaws are not
insulated.
DESCRIPTION
15 kV max
15 kV max
• On insulation measurements with a test voltage ≥ 5000V