Scanning A Book - Fujitsu Libra S6 Operator's Manual

Chapter 4 Various Ways to Scan

Scanning a Book

1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover" (page
21).
2
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
Reference Point
3
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
4
Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
Do not look directly into the light source.
ATTENTION
Do not move the document during a scan.
5
Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover" (page
21).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
45