Operational - Fujitsu Libra S6 Operator's Manual

Chapter 6 Replacing the
Consumables
This chapter describes how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the
scanner is being used.
Before you replace the consumables, make sure
you turn off the power, unplug the power cable and
wait at least 15 minutes for the inside of the ADF to
cool down.
6.1 Consumables and Replacement Cycles.....................................................................................................60
6.2 Replacing the Pad Unit...............................................................................................................................61
6.3 Replacing the Pick Roller Unit ....................................................................................................................63
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary