Operational - Fujitsu Libra S6 Operator's Manual

Chapter 2 How to Load Documents
2.3 Documents for Scanning
Paper Size
The following paper sizes can be scanned:
ADF  Maximum size (width × length)
- A4 (portrait) (210 × 297 mm/8.3 × 11.7 in.)
- Legal (8.5 × 14 in.)
- Long Page (*1)
(216 × 863 mm/8.5 × 34 in., 216 × 3,048 mm/
8.5 ×120 in.)
 Minimum size (width × length)
114 × 140 mm (4.49 × 5.51 in.)
Flatbed  Maximum size (width × length)
216 × 297 mm (8.50 × 11.69 in.)
 Minimum size (width × length)
25.4 × 25.4 mm (1.0 × 1.0 in.)
*1: Depending on the application or the scan settings for the scanner
driver, there may be insufficient memory to perform scanning.
When a long page is scanned, a maximum length of 3,048 mm (120
in.) can be scanned with a scanning resolution of 200 dpi or lower.
Conditions
The following documents can be scanned with the ADF. To
scan documents other than the following, use the flatbed.
Paper Type
The following paper types are recommended:
 Wood-free paper
 Wood-containing paper
 PPC paper (recycled)
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper Weight (Thickness)
The following paper weights can be used:
2
 52 to 127g/m (14.0 to 34.3 lb)
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
34