Program 11-07-01; Configuration Sheet: Department Groups - NEC SL2100 Getting Started Manual

SL2100 GETTING STARTED GUIDE

2.13.5 Program 11-07-01

Give the department group a pilot number. Try to use a number that is easy to remember.
For example use:
Pilot number 401 for group 1
Pilot number 402 for group 2....etc.
2.13.5.1 Default Setting
There are no pilot number assigned.
No. Operation
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
Dial 11 07 01. For each group, enter the pilot number (3 digits
2
required). Dial to reach the group and press Hold key to confirm the
entry and step to the next group. If you duplicate a number, you will
see Duplicate Data. The entry will be removed and you can enter a
new number.
3 When you are done, press Mute key several times to return to
Programming Mode.
4 Press Speaker key to save changes and exit if you are finished.

2.13.6 Configuration Sheet: Department Groups

Defaults are shown.
Telephone Department
number Group
number
16-02-01
default=1
101
102
103
104
105
106
107
108
Department Pilot Number
Group
11-07-01
number
1-50
1
2
3
4
There are 50 groups available, only four are listed as this is usually sufficient.
66
Priority
number
16-02-01
1
2
3
4
5
6
7
8
Ring in Try once or
priority/random continually
16-01-02 16-01-04
default=0 Priority default=0 Once
Display Shows;
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
11-07-01 TEL Group1
Ext Grp No. _
← - +
Ring time before
step on
16-01-09
default=15
seconds
→