Recall For Analog Telephones; Program 82-04-0X - NEC SL2100 Getting Started Manual

PRG 14-02-10
Trunk Setting
number Default= 1 On
Trunk 1
Trunk 2
Trunk 3
Trunk 4
Turn on the Caller ID for each Analog telephone.
PRG 15-03-09
Telephone Setting
Default=0 Off
101
102
103
104
105
106
107
108

2.12 Recall for Analog Telephones

This feature allows you to change the recall setting. You may want to change this setting when you have analog
telephones connected and the RECALL key does not work correctly. This is highlighted when you press the
RECALL key but the call is not placed on hold. Recall is also referred to as Timed Break Recall (TBR).
The SL2100 must be configured with the correct recall timing that matches the analog telephones that you have
connected.

2.12.1 Program 82-04-0x

Set the system to detect a recall duration of 105ms to 1000ms. You will need to change three options within
this program. The SL2100 will accept a recall duration of 540mS to 660mS(600ms±10%).
2.12.1.1 Default Setting
The SL2100 will accept a Recall duration of 105ms to 660ms.
No. Operation
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2 Dial 82 04 04, Enter the Maximum Break Time (default: 100ms (20))
and press Hold key three times to confirm the entry and step to the
next option.
3 Change the setting to 21 (this is equivalent to 105mS) and press Hold
key to confirm the entry and step to the next option.
SL2100 GETTING STARTED GUIDE
Display Shows;
_________________________
______Program
_Base_Service_OP1__OP2__
82-04-04
Max. Break Time
82-04-07
Min. Flash Time
Mode_______
20
← →
21
← →
63