Example Configuration - NEC SL2100 Getting Started Manual

2.6.7 Example Configuration

This example provides a telephone ring assignment configuration.
2.6.7.1 Circumstances
You have three Outside (CO) lines (trunks) connected.
Trunks 1 & 2 (CO1/2) needs to ring at extensions 101 and 102 during the day time working.
During lunch mode, they should ring at extension 105.
In the evenings and on weekends they should forward to an answer phone, the answer phone is
connected to station port 7 and is extension number 107.
Trunk 3 (CO3) is a dedicated line and should go to telephone 106 at all times.
Telephone 101 will have Function keys to change the mode for day, lunch etc.
Step 1
Place the telephones into an IRG for each of the modes (day time, lunch time, evenings and weekends).
IRG
Number
101 102
IRG 1 ,
IRG 2 105 (lunch time)
IRG 3 107 (evenings and weekends)
IRG 4 106 (at all times)
Step 2
Assign the IRG number to each trunk for the modes you will use.
Mode
1 Day
2 Lunch
3 Evening & Weekend
Step 3
Turn on the ability to change the ring mode for day time, lunch time, evenings, etc.
Mode Change Setting
PRG20-07-01 1 (on)
Step 4
Assign modes 1 (Day), 2 (Lunch) and 3 (Evenings and Weekends) to keys at telephone 101.
1. At telephone 101, press Speaker key.
2. Dial service code 751.
3. Press Key 7 (Its current setting is shown in the display). If Key 7 is not defined the function, dial 09
followed by 1 for the mode number.
4. If Key 7 is already assigned the function but not used, press Speaker Key + 752 + .Key 7 + 000 +
Speaker key to clear the current setting and go back to step 1.
5. Dial 09 followed by 1 for the mode number.
6. Repeat steps 3 and 4 for Key 8 = mode 2 and Key 9 = mode 3.
Telephone
101
List of telephones that will ring
(day time)
Trunk 1
PRG 22-05-01
IRG 1
IRG 2
IRG 3
Mode 1 Mode 2
7 8
Key Key
SL2100 GETTING STARTED GUIDE
PRG 22-04-01
Trunk 2 Trunk 3
PRG 22-05-01 PRG 22-05-01
IRG 1 IRG 4
IRG 2 IRG 4
IRG 3 IRG 4
Mode 3
9
Key
57