Push-To-Talk (Ptt) - AT&T SB67118 Getting Started

Telephone base operation
Push to talk (PTT)
You can directly send your voice to the speaker of the registered and in idle
mode extension handset(s). The extension you called can respond just by talk-
ing while pressing the PTT key on the cordless handset. -
PTT to an handset
• Press and hold the one-touch key EXT 1-0 for the destination party while
speaking into the base speakerphone.
• Release the one-touch key EXT 1-0 after speaking.
NOTE: The speakerphone on the destination telephone is activated automatically when you
press and hold the one-touch key.
PTT to all handsets
• Press and hold the one-touch key INT/PTT ALL for all the extension hand-
sets while speaking into the base speakerphone.
• Release the one-touch key INT/PTT ALL after speaking.
Answer a PTT call
• The screen displays Push2TalkIncoming and the caller extension number.
• Press and hold the one-touch key for the extension number while speaking
into the base speakerphone.
NOTES:
1. If the destination telephone is in the Do Not Disturb mode, on an intercom call or on an outside
call, your telephone sounds a busy signal.
2. If the destination telephone is a non-registered handset, the screen displays InvalidMailbox.
50