Push-To-Talk (Ptt); Turn Ptt Incoming Signal On Or Off - AT&T TL96273 Complete User's Manual

Multiple handset

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of any
device. Press and hold PUSH TO TALK on a handset or PTT on the
telephone base to begin two-way communication.
• Only one device can talk at a time. While talking to another
device, press and hold PUSH TO TALK on the handset or PTT on
the telephone base.
• You must release PUSH TO TALK on the handset or PTT on the
telephone base, so the other person can respond.
• Only one PTT session can be active at a time.
• While PTT is in use between two devices, other devices cannot
use the intercom feature but can access the answering system.
• When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.

Turn PTT incoming signal on or off

You can turn PTT on or off on each handset.
• When on, the handset can begin and receive PTT calls.
• When off, the handset can begin PTT calls but will not
receive PTT calls from other handset(s). The idle handset
displays No Incoming PTT.
• When you attempt to place a PTT call to another handset
that has the PTT feature turned off, your handset displays
Not available at this time.
Using a cordless handset or the telephone base:
1. Press PUSH TO TALK on the handset or press PTT on the
telephone base in idle mode.
2. Press or
CID
3. Press or
CID
to highlight PTT On/Off, then press
DIR
to highlight On or Off, then press SELECT.
DIR
70
PUSH TO TALK
HANDSET
Group
PTT On/Off
BACK SELECT
INCOMING PTT
On
Off
BACK SELECT
SELECT .
3