AT&T SB67118 Getting Started page 39

Telephone base operation
Options while on calls
3. If there is an incoming call while the line is on hold, the screen alternatively displays On hold
and Incoming call.
4. You cannot put an intercom call on hold.
5. If a line is in use, pressing INT places the line on hold and activates the intercom (pageX).
Join in
You can join in an ongoing call on another extension handset when the call
privacy is not set on that handset. The corresponding line
icon (page X) displays on the screen when the line is in use.
• Press the desired LINE (1-4) key on the telephone base
to join in the call.
NOTE: When you try to join in the ongoing call on the handset with
call privacy on, the screen displays Privacy and you hear quick beep
tones.
Chain dialing
You can initiate a dialing sequence from the numbers in the directory while
you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account information or access codes) from the directory.
• To access the directory while on a call:
1. During the call, press DIR, then press
the directory.
2. To dial the displayed number, press
without making changes, press EXIT or
with the conversation.
NOTE: You cannot edit a directory entry while on a call. For more
details about the directory, see page X.
or to review to review review
ENTER. To exit
MENU/
and continue and continue
43
1
Conf. 00:00:29
L3 H2
1
Privacy
BANK
123456789
Enter=Call
Line 1 00:16:30
1234567123456789