AT&T SB67118 Getting Started page 35

Telephone base operation
Telephone base basic operation
Temporary ringer silencing
Press MUTE while the telephone is ringing to silence the
ringer temporarily on the telephone base only. This turns off
the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume
NOTE: You do not hear a ringer if you turn off the ringer tone. (See Turn on/off ringer tone on
page X).
Last number redialing
To view the ten most recently dialed numbers
• To display the most recently called numbers (up to 30
digits), press
• To view up to ten recently called numbers, press
or REDIAL repeatedly
PAUSE/
Press EXIT to exit.
To redial a number
• To dial the displayed number, lift the handset
or press SPEAKER.
• To override automatic line selection, press the LINE (1-4)
key for the desired line, then lift the handset.
To edit a number
• While the desired number displays, press
enter editing mode.
• Press or
Press REMOVE to erase digits.
To delete a number
• While the screen displays the desired number, press
REMOVE to delete the number from the redial memory.
REDIAL.
PAUSE/
to move the cursor to the left or right.
ENTER to
MENU/
39
or ,
1234567
LINE 1
1234567
1234567
Deleted