Push-To-Talk (Ptt); Ptt On/Off - AT&T TL96371 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages from one handset or
telephone base to the speakerphone of one or a group of
other devices. Any handset called can respond by pressing
PUSH TO TALK or PTT on the telephone base to begin a
2-way communication.
• Only one handset can talk at a time. To do so, press and hold
the PUSH TO TALK button.
• You must release PUSH TO TALK, so the other person
can respond.
• Only one PTT can be active at a time.
• While PTT is in use between handsets or telephone base,
other handsets cannot use the intercom feature but can
access the answering system.
• When you attempt to place a PTT call to another handset which is
accessing the answering system, your handset displays Not available at
this time.

PTT on/off

You can turn PTT on or off on each device.
• When on, the handset can begin and receive PTT calls.
• When off, the handset can begin PTT calls but will not receive PTT calls
from other handsets. The idle handset displays No Incoming PTT.
• When you attempt to place a PTT call to another handset that has the PTT
feature turned off, your handset displays Not available at this time.
To turn PTT on or off:
Using a handset:
Press PUSH TO TALK when the handset is not in use. The
1.
PUSH TO TALK menu displays.
CID or DIR
2. Press
press SELECT
CID or DIR
3. Press
SELECT
to save. You hear a confirmation tone.
to highlight PTT On/Off, then
.
to highlight On or Off, then press
67
PUSH TO TALK
HANDSET B 3
Group
PTT On/Off
BACK SELECT
INCOMING PTT
On
Off
BACK SELECT