AT&T SB67118 Getting Started page 24

Getting started
Mailbox setup (for answering system)
Select announcement
You can select an announcement for your independent
mailbox from the list of announcements.
1. When the telephone is idle, press ANSWER ON for the
desired line.
2. Press or
3. Press ENTER again to select Mailbox setup.
MENU/
4. Press or
Press ENTER.
MENU/
5. Press or
6. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
NOTE: The auto attendant and the mailbox share the same list of announcements. Preview
the announcements to select the correct announcement before setting.
Record announcement
You can record up to five new announcements so that you can have different
announcements for different lines. Each announcement can be up to two
minutes. Please see Record announcement on page XX.
NOTE: You cannot record an announcement when the phone system is out of space. You will
hear "Sorry, there is no space for recording". Please refer to Remaining space on page X.
Turn off the mailbox
1. When the telephone is idle, press ANSWER ON for the
desired line.
2. Press or
to scroll to Setup. Press
to scroll to Select annc.
to scroll to an announcement.
to scroll to No answer. Press
ENTER.
MENU/
ENTER.
MENU/
28
Mailbox setup
>
Auto attendant
Anncement
Number of rings
Select annc
>
Select annc
:Prerecord
Enter=Save
Select annc
:Annc 1
Enter=Save
Ans->Gen MB only
Ans->Auto att
No answer
>
Setup
Off