Selecting Temperature Units; Ambient / Dew Point / Wet Bulb Temperature Display; Temperature / Clock Display Modes; Activating The Backlight - TPI 1010 Manual

4.2 Selecting Temperature Units

Pressing the

4.3 Ambient / Dew Point / Wet Bulb Temperature Display

Repeatedly pressing the
point temperature, wet bulb temperature, and ambient temperature displays.
Ambient Temperature

4.4 Temperature / Clock Display Modes

Pressing the
and clock display. To set the clock please refer to section 4.6.

4.5 Activating the Backlight

Pressing the
consumption is much higher when the backlight is activated. The backlight
will automatically turn off 30 seconds after it is activated. To conserve bat-
tery life the backlight should only be used when necessary.
key switches the temperature display between °F and °C.
key from the main display cycles through dew
Dew Point Temperature
Indicated by "DP" in the
display
key from the main display cycles between temperature
key turns the display backlight on and off. Power
Wet Bulb Temperature
Indicated by "WB" in
the display