4.7 Setting CO Alarm Level
The 1010 is equipped with an audible and visual alarm for carbon monoxide. The
alarm level is factory set at 30ppm. When CO above this level is measured, the
1010 will beep and the display will flash red.
The alarm level is adjustable and can be set from 10ppm to 500ppm.
1) With the 1010 turned on, press and hold down the
until the CO alarm screen is displayed.
Using the Arrow keys set the alarm point to the desired level. The
keys select the digit and the
Once the desired alarm point is set, press the
operation.
and
CO alarm level in ppm
keys increase or decrease the value.
key to return to normal
keys
Need help?
Do you have a question about the 1010 and is the answer not in the manual?