Wireless three channel vibration analyzer & data collector (8 pages)
Summary of Contents for TPI 600 Series
Page 1
It is backed by a 3 year limited warranty. Please remember to return you product warranty registration card. Product Description The TPI 600 series is a hand held range of pressure meters and can be summarized as follows. TPI 610 - Single Input - 4 Function - single unit of pressure TPI 615 - Single Input - 7 Function - 7 units of pressure TPI 620 –...
Page 2
Safety Considerations Warning: Please follow the manufacturer’s test procedure whenever possible. Make sure the pressure to be measured is not outside the range of the TPI 610/615/620/625 meter General Guidelines Always · Test the pressure meter before use to ensure it is operation properly ·...
Page 3
To cancel the function press ‘Zero’ (TPI 615/625 only) HOLD Maintains the reading on the LCD display (TPI 615/625 only) UNITS Selects 7 units of pressure kPa, PSI, inHg, mmHg inH20, mbar (TPI 615/625 only) page 5 1.800.561.8187...
Page 4
(TPI 615/625 only) Hold- Enables the user to freeze the display reading when working in cramped working conditions, when the display is not visible. (TPI 615/625 only) Units- Change the display value in any one of the following engineering units. kPs, PSI, inHg, mmHg, inH20, mmH20 and mbar.
Page 6
‘MAX/MIN’ key (TPI 615/625 only) · To convert the displayed pressure reading to another engineering unit depress the ‘UNIT’ key anytime and scroll through to the desired units of pressure. (TPI 615/625 only) page 8 1.800.561.8187...
Page 7
Silicone Tube w/ ¼” barbed 1/8” NPT fitting A603 Optional Accessories Part No 3 metre (6 ft) nitrile rubber tubing A601 Large Zipped pouch A904 Specifications Model TPI 610 TPI 615 TPI 620 TPI 625 Features Auto Range -200.0 mbar to -200.0 mbar Accuracy + (0.5% of reading + 5 Digits)
Maintenance Battery Replacement: The 610/615/620/625 will display a ‘BAT’ symbol when the internal 9V battery needs replacement. Replace battery as follows: 1. Ensure instrument is switched off 2. Loosen the six cross head screws on the back of the instrument 3.
Trouble Shooting Guide Problem Probable Cause Unit does not zero Zero button has not been operated Unit still does not zero If reading is greater than 0.05 and constantly fluctuation return to local service centre. ‘Bat’ appears on display Replace battery immediately 9V NEDA 1505 or equivalent EC Declaration of Conformity This is to certify that model 610/615/620/625 conform to the protection requirements of the council directive 89/336/EEC, in the approximation of laws of the member states...
Page 10
This TPI product is warranted to the purchaser against defect is materials and workmanship for 3 years from the date of purchase. Covered by TPI: Repair parts and labor; or replacement of the product at the option of TPI. Normal transportation charges to the purchaser are also covered.
Need help?
Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers