Initialize System - Symmetricom TimeSource 3100 User Manual

S S S S S S S

Initialize System

4
146
S S S S S S S S S
This command resets the specified processor.
Caution:
Using this command with an <aid> of TS3100 will cause a loss of outputs for
approximately 20 minutes if ALMOUT is SQUELCH, or unstable outputs if ALMOUT is not
SQUELCH.
The command format is:
INIT-SYS:[<tid>]:<aid>:<ctag>::1;
Aid
TS3100 System software
GPS GPS receiver software
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
S S S S S S S S S
Item Addressed
S S S S S S S S S
TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
S S S S S