Symmetricom TimeSource 3100 User Manual page 142

S S S S S S S
Enter Equipment (cont'd)
4
142
S S S S S S S S S
The parameters which can be entered in the <spec_block> are listed below. For any specific
<aid> entered in a command, only certain parameters are valid. For each valid parameter,
choose the appropriate value from the Value column. When entering multiple parameters,
separate the parameters with commas.
Aid Parameter
RO-a ENSEMBLER=b
SPAN-a ENSEMBLER=b
Example to set an input to be monitored, but not ensembled:
ENT-EQPT:[<tid>]:RO-A:<ctag>;
Example to set an input to be monitored and ensembled:
ENT-EQPT:[<tid>]:RO-A:<ctag>:::ENSEMBLER=ALW;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
S S S S S S S S S
Value
b=ALW Remote oscillator is monitored and
ensembled
b=INH Remote oscillator is monitored, but not
ensembled
b=ALW Span is monitored and ensembled
b=INH Span is monitored, but not ensembled
S S S S S S S S S
Description
TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
S S S S S