Table of Contents
Advertisement
Quick-Start Programming
12. Specify the extension number to call for each ISDN incoming DID
13. Some ISDN lines provide Automatic Number Identification (ANI). This
14. If you need to program multiple extensions to ring with DIDs, go to the
Multiple DID Programming
1. If you wish to assign the same DID number to more than one station,
2. Assign the ISDN DID numbers to stations (page 4-29).
3. Reset the DBS by turning it off then on again.
Revised April 2000
number (page 4-29).
Address
FF1 9# 3# (0000-9999)# (100-699)#
service is similar to Caller ID by providing the number of the calling party.
For DID calls with ANI information provided, determine if ANI data or
DID data is displayed on the called telephone..
Address
FF3 (Ext Port)# 54# (0-1)#
Options
0=DID data on display
1=ANI data on display
instructions under "Slave Cabinet Set-UpMultiple DID Programming."
If you do not need to program multiple DIDs, you are finished with initial
ISDN programming. Reset the DBS by turning it off then on again.
enable Multiple DID/DNIS numbering (page 4-33).
Address
FF1 2# 1# 32# (0-1)#
Options
0=Off
1=On
Address
FF1 9# 3# (0000-9999)# (10-69 or 100-699)#
DBS-EX23-530
Programming Initial ISDN Options
3-9
Advertisement
Table of Contents
