Table of Contents
Advertisement
When a call is transferred to the All Ring Group, every phone in the All Ring
Group rings. When any phone in the group is answered, all phones stop
ringing.
Notes
• The All Ring Group may include the UNA (780).
• The original call must be a CO call. An internal call cannot be transferred
• A call presented to an All Ring Group will not recall or revert. The call
• All Ring Groups cannot be chained together. In other words, an All Ring
• Extensions may be a member of multiple All Ring Groups.
• If the DBS is part of a networked system, the All Ring Group members
• Only one call at a time may ring at a key telephone if non-appearing (lights
*Private Password
Description
A new private password has been added to allow entry into system
programming at any time. This is useful if the normal system and/or remote
password is forgotten, lost, mis-entered, or intentionally changed by an
unauthorized person.
SPECIAL NOTICE: The private password should be changed from the
default setting after system installation, recorded and kept confidential by the
system manager.
SPECIAL NOTICE: The system must be entered using the private password
to view the private password programming address.
Programming
Programming Address
FF1 6# 3# [NNNN]#
Default Password: 6789
DBS-2.3-400
to an All Ring Group. If you attempt to transfer an internal call to an All
Ring Group, you will receive busy tone.
must be answered or the caller must hang up.
Group Pilot Number cannot be assigned as a member of another All Ring
Group.
must be extensions on the local node.
the EXT LED).
DBS Manual - Revised April 2000
Page A-11
Advertisement
Table of Contents
